copyright ? 2001 panduit corp. all rights reserved. product bulletin self-laminating labels for laser a nd ink jet printers ? same label can be printed on laser or ink jet printer white print-on area with clear overlaminate for permanent protected identification thin film with permanent adhesive us letter sheet format (8.5" x 11" / 215.9mm x 279.4 mm) din a4 sheet format (8.26" x 11.69" / 210 mm x 297 mm) ?labels available with tia specified colored print-on area. to order, insert color designation after ?y3? in part number: blu f or blue, brn for brown, grn for green, gry for gray, orn for orange, pur for purple, red for red, or yel for yellow. i.e. order lsjl4-y3blu-2.5 for blu e print-on area. *order number of labels required in multiples of std. pkg. qty. part number material label size a x b x c in. (mm) nominal cable o.d. range in. (mm) typ ic al electrical (thhn) typical utp std. pkg. qty.* ljsl1-y3-5 gmy6 self- laminating pol ye st e r 0.50 x 0.75 x 0.34 (12.7 x 19.1 x 8.6) 0.11 - 0.13 (2.7 - 3.3) 12 awg ? 5000 ljsl2-y3-5 0.50 x 1.50 x 0.50 (12.7 x 38.1 x 12.7) 0.16 - 0.32 (4.0 - 8.1) 8-6 awg 4 pair 5000 ljsl3-y3-2.5 1.00 x 0.75 x 0.34 (25.4 x 19.1 x 8.6) 0.11 - 0.13 (2.7 - 3.3) 12 awg ? 2500 ljsl3-y3-5 5000 ljsl4-y3-2.5 ? 1.00 x 1.00 x 0.34 (25.4 x 25.4 x 8.6) 0.11 - 0.21 (2.7 - 5.3) 12-10 awg ? 2500 ljsl5-y3-1 1.00 x 1.33 x 0.47 (25.4 x 33.8 x 11.9) 0.15 - 0.27 (3.8 - 6.8) 10-6 awg 4 pair 1000 ljsl5-y3-2.5 ? 2500 ljsl20-y3-1 1.00 x 1.33 x 0.50 (25.4 x 33.8 x 12.7) 0.16 - 0.26 (4.0 - 6.7) 8-6 awg 4 pair 1000 ljsl6-y3-1 1.00 x 3.17 x 0.97 (25.4 x 80.5 x 24.6) 0.31 - 0.70 (7.8 - 17.8) 4 awg-4/0 4-50 pair 1000 ljsl19-y3-1 1.00 x 5.45 x 1.00 (25.4 x 138.4 x 25.4) 0.32 - 1.42 (8.1 - 36.0) 4 awg- 1000 mcm 4-300 pair 1000 ljsl18-y3-1 1.88 x 3.17 x 0.97 (47.8 x 80.5 x 24.6) 0.31 - 0.70 (7.8 - 17.8) 4 awg-4/0 4-50 pair 1000 ljsl7-y3-1 2.00 x 1.50 x 0.50 (50.8 x 38.1 x 12.7) 0.16 - 0.32 (4.0 - 8.1) 8-6 awg 4 pair 1000 LJSL8-Y3-1 2.00 x 3.17 x 1.00 (50.8 x 80.5 x 25.4) 0.32 - 0.69 (8.1 - 17.5) 4 awg-4/0 4-50 pair 1000 part number material label size a x b x c in. (mm) nominal cable o.d. range in. (mm) typ ic al electrical (thhn) typical utp std. pkg. qty.* ljsl9-y3-2.5 ? gmy6 self- laminating pol ye st e r 0.70 x 1.33 x 0.33 (17.8 x 33.8 x 8.4) 0.11 - 0.32 (2.7 - 8.1) 12-6 awg 4 pair 2500 ljsl10-y3-1 0.90 x 2.17 x 0.50 (22.9 x 55.0 x 12.7) 0.16 - 0.53 (4.0 - 13.5) 8 awg-1/0 4-25 pair 1000 ljsl21-y3-1 ? 0.90 x 2.17 x 0.67 (22.9 x 55.0 x 17.0) 0.21 - 0.48 (5.3 - 12.1) 8-1 awg 4-25 pair 1000 ljsl11-y3-1 ? 1.00 x 2.67 x 0.67 (25.4 x 67.8 x 16.9) 0.21 - 0.64 (5.3 - 16.2) 8 awg-3/0 4-50 pair 1000 ljsl12-y3-1 1.20 x 2.67 x 0.83 (30.5 x 67.8 x 21.1) 0.26 - 0.58 (6.6 - 14.9) 6 awg-2/0 4-25 pair 1000 ljsl17-y3-0.5 ? 1.40 x 3.67 x 1.00 (35.6 x 93.1 x 25.4) 0.32 - 0.85 (8.1 - 21.6) 4 awg- 350 mcm 4-50 pair 500 ljsl14-y3-0.5 1.40 x 5.50 x 1.00 (35.6 x 139.7 x 25.4) 0.32 - 1.40 (8.1 - 35.6) 4 awg- 1000 mcm 4-300 pair 500 ljsl15-y3-0.5 1.80 x 5.50 x 1.17 (45.7 x 139.7 x 29.6) 0.37 - 1.38 (9.5 - 35.0) 2 awg- 1000 mcm 4-300 pair 500 ljsl21-po3-1 gmpo6 polyolefin 0.90 x 2.17 x 0.67 (22.9 x 55.0 x 17.0) 0.21 - 0.48 (5.3 - 12.1) 8-1 awg 4-25 pair 1000 a b c
this warranty is made in lieu of and excludes all other warranties, expressed or implied. the implied warranties of merchantability and fitness for a particular use are specifically excluded. neither seller nor manufacturer shall be liable for any other injury, loss or damage, whether direct or consequential, arising out of the use of, or the inability to use, the product. the information contained in this literature is based on our experience to date and is believed to be reliable. it is intended as a guide for use by persons having technical skill at their own discre- tion and risk. we do not guarantee favorable results or assume any liability in connection with its use. dimensions contained herein are for reference purposes only. for specific dimensional requirements consult the factory. this publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. this supersedes and voids all previous lit- erature, etc. our products are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to the replacement of any product proved to be defective within 6 months (for product) or 90 days (for tools) from the date of delivery. tool warranty is void if panduit tools are modified, altered or misused in any way. use of panduit tool- ing with any product other than the specified panduit products for which the tool was designed, constitutes misuse. before using, user shall determine the suitability of the product for his intended use and user assumes all risk and liability whatsoever in connection therewith. c on t ac t hei lin d ele c tro ni cs f or al l o f you r pa nd uit ne ed s a t (80 0 ) 40 0- 704 1 electrical group cross reference to other panduit part numbers the new ljsl series is replacing many older panduit label parts. users of jsl, pel and pll self-laminating labels should refer to the chart below to determine the new ljsl part number to order. self-laminating labels for laser and ink jet printers old part number ljsl part number jsl1-y3-5 ljsl1-y3-5 jsl2-y3-5 ljsl2-y3-5 jsl3-y3-2.5 ljsl3-y3-2.5 jsl4-y3-2.5 ljsl4-y3-2.5 jsl5-y3-1 ljsl5-y3-1 jsl5-y3-2.5 ljsl5-y3-2.5 jsl6-y3-1 ljsl6-y3-1 jsl7-y3-1 ljsl7-y3-1 jsl8-y3-1 LJSL8-Y3-1 jsl9-y3-2.5 ljsl9-y3-2.5 jsl10-y3-1 ljsl10-y3-1 jsl11-y3-1 ljsl11-y3-1 jsl12-y3-1 ljsl12-y3-1 pel-17-blu-2.5 ljsl9-y3blu-2.5 pel-17-brn-2.5 ljsl9-y3brn-2.5 pel-17-grn-2.5 ljsl9-y3grn-2.5 pel-17-gry-2.5 ljsl9-y3gry-2.5 pel-17-orn-2.5 ljsl9-y3orn-2.5 pel-17-pur-2.5 ljsl9-y3pur-2.5 pel-17-red-2.5 ljsl9-y3red-2.5 pel-17-y3-2.5 ljsl9-y3-2.5 pel-17-yel-2.5 ljsl9-y3yel-2.5 pel-18-blu-1 ljsl21-y3blu-1 pel-18-brn-1 ljsl21-y3brn-1 pel-18-grn-1 ljsl21-y3grn-1 pel-18-gry-1 ljsl21-y3gry-1 pel-18-orn-1 ljsl21-y3orn-1 pel-18-po3-1 ljsl21-po3-1 pel-18-pur-1 ljsl21-y3pur-1 pel-18-red-1 ljsl21-y3red-1 pel-18-y3-1 ljsl21-y3-1 pel-18-yel-1 lsjl21-y3yel-1 pel-19-blu-1 ljsl11-y3blu-1 pel-19-brn-1 ljsl11-y3brn-1 pel-19-grn-1 ljsl11-y3grn-1 pel-19-gry-1 ljsl11-y3gry-1 pel-19-orn-1 ljsl11-y3orn-1 pel-19-pur-1 ljsl11-y3pur-1 pel-19-red-1 ljsl11-y3red-1 pel-19-y3-1 ljsl11-y3-1 pel-19-yel-1 ljsl11-y3yel-1 pel-20-y3-1 ljsl12-y3-1 pel-21-blu-0.5 ljsl17-y3blu-.5 pel-21-brn-0.5 ljsl17-y3brn-.5 pel-21-grn-0.5 ljsl17-y3grn-.5 pel-21-gry-0.5 ljsl17-y3gry-.5 pel-21-orn-0.5 ljsl17-y3orn-.5 pel-21-pur-0.5 ljsl17-y3pur-.5 pel-21-red-0.5 ljsl17-y3red-.5 pel-21-y3-0.5 ljsl17-y3-0.5 pel-21-yel-0.5 ljsl17-y3yel-.5 pel-22-y3-0.5 ljsl14-y3-0.5 pel-23-y3-0.5 ljsl15-y3-0.5 pel-30-y3-1 ljsl10-y3-1 pll-3-y3-5 ljsl1-y3-5 pll-10-y3-2.5 ljsl3-y3-2.5 old part number ljsl part number pll-10-y3-5 ljsl3-y3-5 pll-11-y3-2.5 ljsl4-y3-2.5 pll-11-y3b-2.5 ljsl4-y3blu-2.5 pll-11-y3br-2.5 ljsl4-y3brn-2.5 pll-11-y3g-2.5 ljsl4-y3grn-2.5 pll-11-y3ig-2.5 ljsl4-y3gry-2.5 pll-11-y3or-2.5 ljsl4-y3orn-2.5 pll-11-y3pr-2.5 ljsl4-y3-pur-2.5 pll-11-y3-rd-2.5 ljsl4-y3red-2.5 pll-11-y3y-2.5 ljsl4-y3yel-2.5 pll-12-y3-1 ljsl5-y3-1 pll-12-y3-2.5 ljsl5-y3-2.5 pll-12-y3b-2.5 ljsl5-y3blu-2.5 pll-12-y3br-2.5 ljsl5-y3brn-2.5 pll-12-y3g-2.5 ljsl5-y3grn-2.5 pll-12-y3ig-2.5 ljsl5-y3gry-2.5 pll-12-y3or-2.5 ljsl5-y3orn-2.5 pll-12-y3pr-2.5 ljsl5-y3pur-2.5 pll-12-y3rd-2.5 ljsl5-y3red-2.5 pll-12-y3y-2.5 ljsl5-y3yel-2.5 pll-13-y3-1 ljsl6-y3-1 pll-21-y3-1 LJSL8-Y3-1 pll-33-y3-5 ljsl2-y3-5 pll-37-y3-1 ljsl18-y3-1 pll-38-y3-1 ljsl19-y3-1 pll-39-y3-1 ljsl20-y3-1 pll-40-y3-1 ljsl7-y3-1 old part number ljsl part number
|
